What is a carpenter's hammer

Overview of hammer types

The hammer tool is arguably one of the oldest tools known to mankind. And even today a good hammer belongs in every basic equipment of a tool case.

The most common are the locksmith's hammer and the carpenter's hammer. With a weight of 300 grams, it is well suited for normal work. Small nails and pens are easier to drive in with a 100 gram hammer. A plastic mallet is very useful as a supplement to the original equipment.

A hammer is always held at the rear end of the handle in order to use the impact intensity correctly and to hit it precisely. In the manufacture of a hammer, the face, i.e. the flat side, and the pointed fin are given a different degree of hardness than the hole that ultimately receives the hammer handle.

That decides on the quality of a hammer, because the face and fin must be impact-resistant, but must not be brittle so that nothing can splinter when hit. Or to put it more simply: head and handle must be firmly connected!

Hammer: overview of tool types

Nailed it. No problem with one Engineer's hammer.It is the classic among the hammers and should not be missing in any household. The most common areas of application are driving in nails or dowels.

Hammer shapes: left the machinist's hammer, in the middle the carpenter's hammer. The engineer hammer has a round head.

A fist (left, between 1000 - 2000 grams) is needed for chiselling and metal work. Long-handled sledge hammers (right) weigh up to 10 kilograms. Due to their weight, they should be handled with both hands. They are often used for demolition work, wall breakthroughs or for driving piles.

Soft hammers have heads made of hard rubber or plastic. A blow on soft material, such as wood, does not leave any pressure marks.

Wooden hammers and mallets are lighter and gentle on tools. Chisels and carving tools are processed with it.

The Claw Hammeralso pulls nails like a cow's foot. The claw hammer has a magnetic groove for attaching the nail.

The specialists: The sharp, wide fin of the mason's hammer (left) is used to cut stones, stones are knocked with the track. The veneer is rubbed with the wide, rounded fin of the veneer hammer (middle).

Slag from the weld is removed with the tips of the welding hammer (right). The tile hammer with a pointed fin and the glass hammer with the polished head (below) are comparatively light.

Protective caps make soft-face hammers out of hammers and machinists. For example, plasters remain undamaged when you knock.