What is a Kreg template used for?

  1. Drill rows of holes

    I am looking for a way to get rows of 32 holes with a cordless drill. For my various small projects, the Festool version is simply too expensive because I don't have a suitable router. I came across this stencil while searching ...
  2. Get M screw on US thread

    Hello everyone, at the weekend I got two Kreg clamps from a friend (this one here: https://www.sautershop.de/kreg-schraubzwinge-automaxx-152-mm-kr-kbc6). The stupid thing is that this screw for the inlet into the groove rail is a US screw with US thread. I speak ...
  3. Insert plate for Triton OF TRA001

    Hi Guys. I have a Triton OF TRA001 and am about to befriend it with my saw. The two should be united. :-) A metal construction with a sturdy wooden plate is commissioned and then there is nothing left to use the table for saw and milling machine ...
  4. Scheppach TS 4000 angle stop / miter stop

    Hello everybody! I own a Scheppach TS4000 with sliding carriage and am really satisfied with the saw for my area of ​​application! However, I have a relatively small garage available (16m2) with which handling the cross stop of the sliding carriage with small mitres is relatively ...
  5. 19 mm screws Kreg Jig

    Hi, I bought 19mm screws from Kreg Jig, believing they were for 12mm material. Unfortunately that wasn't right. Does anyone know what these screws should fit for? Didn't find anything right away. For me, the drilling jig for 12mm material is also over. greetings from Munich
  6. Customs offices Kreg insert plate

    Moin, I bought the Kreg platter for the frestisch. There are now inch screws included. How do I find the right nut size for this or has someone copied them? thanks
  7. Kreg Pocket Hole Screws? Size designation?

    Moin, I can't find my way around the screw names. I would like to buy the Pocket Hole Junior Set to repair beer tent tables. I can't find the screw size in diameter anywhere and I don't know how hard the screws are pulling. There are...
  8. Kreg drilling template for pot hinges

    Hello, just found this drilling template in the Sautershop ...
  9. My favorite workpiece hold-down device

    as threatened elsewhere, here is my first post. It had always annoyed me that I had to crawl under the MFT to counter any holder. At the same time it was either too wobbly (various ... dogs) or too annoying (forcing of all kinds) for me when milling dominoes ...
  10. Kreg K5. Base plate not flat.

    Hi, I received Kreg K5 Master System in the mail yesterday. Of course I wanted to try the template right away, but found that the base plate is not flat. I also attached a photo. That means that it is not really possible to set it up safely. The record, think ...
  11. Install the Kreg insert plate

    Hello, I received my mounting plate from the Kreg company today and I am shocked to discover that I do not speak and understand the languages ​​in the installation instructions either. Are these installation instructions also available in German somewhere? Can't find it. And with which ...
  12. Kreg milling fence: extraction. Are there any experiences?

    Moin to each other. I have now finally largely completed my router table. Last year I bought the router fence from Kreg https://www.kregtool.com/store/c35/router-table-systems/p355/precision-router-table-fence-/ for it. Makes a good impression overall ...
  13. Kreg Pocket Hole - additional lamello or wooden dowels?

    Hello, I read through quite a few posts about the Pocket Hole System last week and I'm ready to buy the Kreg Jig R3. What is not so clear to me yet ... wouldn't it make sense to use wooden dowels or lamellas in addition? I like to build - because it ...
  14. Connect the Kreg K5 to the Festool CTL Midi

    Hello everyone, does anyone know a way or a suitable adapter to connect the Kreg K5 nozzle to a Festool CTL Midi? I've read that you can use the Festool brush attachment, but that doesn't work (anymore) with the K5 system. Maybe someone has one ...
  15. Load capacity pocket hole connections (Kreg jig)

    Hello experts, I know that this type of connection is not the high school of wood connections. For a quick shelf or a small machine table in the basement, I find the solution not at all bad. I have now written to the Kreg company and asked for data on the load capacity ...
  16. Kreg extension leaf

    Hello, I'm just starting to think about building a router table. Have a first question, what is the brass bolt shown in the picture for, which can be screwed into the router table top? KREG insert plate mounting plate for router router table do-it-yourself | eBay greeting
  17. Table screw length for Kreg Jig - Pocket Holes

    Hello everyone, unfortunately I have found an answer to the following question via the manufacturer HP, google or search function of this forum. Which screw lengths are used for which material thicknesses? Is there a table or something similar somewhere = I want the Kreg ...
  18. BOSCH GOF 1600 CE Professional compatible with KREG PRS 1040 router table?

    Hello! Can someone tell me whether this router table router table PRS 1040 + circuit breaker + spring clamp combination. - www.sautershop.de is compatible with this router GOF 1600 CE Professional Router Router | Bosch Professional or is that a sensible combination? I...
  19. Kreg K4 or K5 or Domino? Or everything?

    Hello, may I ask you something? Has anyone had any experience with the Kreg K5 bag lock system? Is that better than the K4? Especially when it comes to handling. And in general: Do I understand correctly that these blind holes do not replace a doweled connection in furniture construction, which ...
  20. Kreg router fence

    On one of my tours through the US tool wonderland, I noticed this Kreg milling fence. I think that's an interesting part. Just the information is a bit scanty. I would have liked to have known any of you had such a part? Can it be used in conjunction with ...
  • This site uses cookies to personalize content and to keep you logged in after registration. By using our website, you agree to this.